How to Use Eleaf ELLO S Tank - User Manual

12:37 AM Admin 0 Comments

How to Use ELLO S Tank


1. Drip a few drops of e-liquid directly into the Ello S atomizer head to make the coil(s) inside fully saturated before first use; 
2. Screw the primed atomizer head onto the atomizer base tightly; 
3. Put the glass tube on, and screw the top cap with mouthpiece on; 
4. Slide the mouthpiece back to reveal the fill port, slowly fill e-liquid into the tank through the port, and then close the retractable top after filling; (Note: please don’t overfill.) 
5. The airflow can be adjusted by rotating the airflow control ring on the atomizer base; 
6. Finally the ELLO S is ready for use. Warranty We are not responsible for any damages caused by human error. Legal warranty is applied. 


1. Please keep out of reach of children. 
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine. 


1. Do not attempt to repair the product by yourself as damage or personal injury may occur. 2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged. 
3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid. 

Possible Adverse Effects 

1. This product may be hazardous to health and contains nicotine which is addictive. 2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.


So verwenden Sie Eleaf iCard - Broschüre - Deutsch

7:24 PM Unknown 0 Comments

Gebrauchsanleitung Eleaf iCard : 

iCard Montageanleitung: 

1. Entfernen Sie die Abdeckung und ziehen Sie das Mundstück hoch;
2. Träufeln Sie ein paar Tropfen E-Liquid direkt in den Verdampferkopf, damit die Spule vor dem ersten Gebrauch vollständig mit e-Liquid befeuchtet wurde.
3. Setzen Sie den Verdampferkopf in den Tank ein, schrauben Sie ihn fest und ziehen Sie ihn mit dem kleinen Metallstück im Mundstück fest (siehe Abbildung 2-1), und setzen Sie dann das Mundstück zurück.
4. Stellen Sie das Gerät auf den Kopf und schieben Sie den Schalter, um den Tank zu entriegeln. (Siehe Bild 2-2)
5. Drehen Sie den Tank im Uhrzeigersinn, um das Einfüllloch freizulegen und geben Sie langsam e-Liquid in den Tank ein. (Siehe Bild 2-3)
6. Drehen Sie den Tank zurück und schieben Sie den Schalter zum verriegeln zurück. Nun ist das Gerät einsatzbereit

Eleaf iCard Benutzerhandbuch

Ein- / Ausschalten: drücken Sie die Taste innerhalb von zwei Sekunden fünfmal hintereinander. Die Kontrollleuchte blinkt fünf Mal zur Bestätigung. Ebenso kann das Gerät ausgeschaltet werden. Die Farbe der Anzeigeleuchte ändert sich entsprechend der verbleibenden Batteriekapazität wie folgt:

Vaping: halten Sie die Taste gedrückt, um einen Zug zu machen. Beim Dampfen leuchtet die Anzeigelampe.

Aufladen: das Gerät kann aufgeladen werden, indem Sie es mit dem 1A-Wandadapter oder Computer über das USB-Kabel verbinden. Die Kontrollleuchte leuchtet während des Ladevorgangs rot und erlischt, wenn sie vollständig geladen ist.

Eigenschaften und Schutz: Widerstandsbereich: 0.4Ω-3.0Ω Verdampferschutz: Wird länger 15 Sekunden die Feuertaste gedrückt, blinkt die Anzeigeleuchte 10 Mal und das Gerät schaltet sich automatisch ab.

Überspannungsschutz: Tritt beim Verdampfen eine Überspannung auf, blinkt die Anzeigeleuchte 5 Mal und die Ausgabe wird unterbrochen. Wenn während des Verdampfens eine Überspannung auftritt, blinkt die Kontrollleuchte 3 Mal.

Niederspannungsschutz: Liegt die Spannung des Geräts unter 3,3 V, blinkt die Anzeigeleuchte 20 Mal und das Gerät schaltet sich aus. Laden Sie das Gerät auf, um es wieder zu nutzen.

Ausgangsspannung: Ist die Spannung des Gerätes niedriger als 3,7 V ist, ist die Ausgangsspannung konstant 3,7 V; Ist die Spannung des Geräts niedriger als 3,7 V, ändert sich die Ausgangsspannung entsprechend dem Akkustand.


Eleaf iStick Basic Kit Instruction - Vape Manual

6:24 PM Unknown 0 Comments

Notice for Use Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at

Product Introduction 

The iStick basic with the GS Air 2 atomizer is a new starter kit from Eleaf. Not only does the iStick basic have a large battery capacity of 2300mAh, it also features its innovative magnetic connector and atomizer built-in structure for ease of usage and carry. With a fashionable metallic appearance, the iStick basic also comes with many attractive colors for your options

How to Use

1) Assembling: 1.First screw the atomizer head onto the atomizer base tightly; 2.Next put together atomizer base, atomizer tube and mouthpiece;

3.Then screw the GS Air 2 atomizer onto the magnetic 510 connector tightly;
4.Finally put the GS Air 2 atomizer into the iStick basic.

2) E-liquid Filling: 1.First pull out the atomizer from the iStick basic; 2.Next unscrew the atomizer base off the atomizer; 3.Then slowly fill the e-liquid into the atomizer along the tube; 4.Finally screw the atomizer base onto the atomizer again.


a) Please don’t overfill and make sure the liquid level is between 10%-90%; b) Please first drip a few drops of e-liquid directly into the wick so as to make the atomizer head fully saturated before vaping.

3) Air Inflow Adjustment: The amount of air inflow can be easily adjusted by rotating the airflow control ring on the atomizer base so as to get different vaping experiences

4) Power on/off: Press the button five times in quick succession within two seconds, the white button light will flash five times to show the iStick basic is ready for use. In the same way, the device can also be turned off.

5) Vaping: Long press the button to take a puff.

6) Charging: Charge the device by connecting it with wall adapter or computer via the USB cable.

The button light will turn red when the device is charging and the light will go out when fully charged. It will take about three hours to get a full charge via 1A wall adapter.


Atomizer Protection: When vaping time exceeds fifteen seconds, the device will shut off automatically with the white button light flashing ten times.

No Atomizer Protection: The white button light will flash slowly when the button is pressed down without atomizer connected.

Short-circuit Protection: Short-circuit occurs with the white button light flashing three times. Low-voltage Protection: When the voltage of device is below 3.3V, the white button light will flash 40 times. Charge the device to power it on.

Battery Level Indication Function: The white light will stay lit or flash slowly after a puff when the battery level is high. On the contrary, the light will flash in frequency.


1. Only have your iStick basic Kit repaired by Eleaf. Do not attempt to repair the unit by yourself as damage or personal injury may occur.
2. Do not leave the iStick basic Kit in high temperatures or damp conditions, otherwise it may be damaged. The appropriate operation temperature is within 0℃to 45℃ while charging and -10℃ to 60℃ while using.
3. Do not attempt to combine the iStick basic Kit with parts from other brands of e-cigarettes. If it is damaged in this way, our company will not take on responsibility and your warranty will be void.

We are not responsible for any damages caused by human error. Legal warranty is applied.


Comment utiliser le kit Eleaf iJust3 - Manuel - Français

12:01 AM Admin 0 Comments

Comment utiliser? 

Mise sous / hors tension: appuyez sur le bouton 5 fois de suite, le voyant clignote 5 fois pour indiquer que l'appareil est sous tension. De la même manière, il peut également être mis hors tension. La couleur du voyant change en fonction de la capacité restante de la batterie, comme suit:


maintenez le bouton enfoncé pour prendre une bouffée lorsque l'appareil est allumé. Lors de la vaporisation, le voyant reste allumé.


l'appareil peut être chargé en le branchant avec un adaptateur mural 1A ou un ordinateur via le câble USB. Le voyant lumineux est rouge pendant le chargement et s'éteint lorsqu'il est complètement chargé.

Propriétés et protections: 

Plage de résistance: 0.1Ω-3.0Ω

Protection d'atomiseur: 

chaque fois que le temps de vape dépasse 15 secondes, le voyant clignote 10 fois et l'alimentation se coupe automatiquement.

Protection contre les courts-circuits: 

si un court-circuit survient avant le vapotage, le voyant clignote 5 fois et l'alimentation se coupe automatiquement lorsque vous commencez à vaper; Si un court-circuit se produit pendant le vapotage, le témoin clignote 3 fois.

Protection basse tension: 

lorsque la tension de l'appareil est inférieure à 3.3 V, le voyant clignote 40 fois et il n'y a pas d'alimentation lors du vapotage. Chargez l'appareil pour le réactiver.


How to Use Vaporesso SKRR Tank - User Manual

6:20 PM Unknown 0 Comments



● Innovative QF air distribution system   Eliminating cold air intake for warmer,    richer flavors, increasing and optimizing    the airflow to create even bigger and    denser clouds than ever before!
● No more spit back   The bullet-shaped inner structure    change the air flow to prevent liquid    from coming up through the drip tip.
● Best leak protection   By having the QF airflow and an    internal reservoir design, we have    minimized the leaking and maximized    the use of your e-juice by recycling any    that potentially lost.
● Flax Fiber with Cotton    Longer coil lifespan & more consistent    flavor !

● Simple Locking Mechanism on drip tip


Refillable tank capacity: 8/2ml
Dimensions: 59.85 x 30 x 30 mm(8ml) / 59.85 x 27.8 x 27.8 mm(2ml)


1. Adjustment of Air Flow 

The bottom airflow system can be adjusted by twisting the airflow ring.

2. Filling E-liquid 

Unscrew drip tip to unlock the tank, rotate lid on the direction indicator and then you can fill your favorite E-juice in.

3. Changing Atomizer

Remove base to unscrew the coil and insert the new one. Secure the base back onto the device. There are a variety of coils available for SKRR Tank. Please select the coil you desire.

WARNING: 1. When using a new atomizer, after filling in e-liquid, let the tank stand for 5 minutes, so the coil can be saturated with juice before firing. 2. Refill the tank before the tank becomes completely empty in order to avoid dry burnt or damage to the atomizer 3. Keep it out of reach of children and pet

This refillable electronic cigarette is intended for use with compatible liquid, which may contain nicotine. Nicotine is an addictive substance and its use is not recommended for use by the following:

- Non smokers or persons under the legal smoking age
- Pregnant or breastfeeding women
- Persons experiencing heart disease, stomach or duodenal ulcers, liver or kidney problems, long-term throat disease or difficulty breathing due to bronchitis, emphysema or asthm


Three Best BF Mod in 2018 - Vape Guide

1:05 AM Admin 0 Comments

For vapers who like RDA vaping, BF Mod is no stranger. This is a vape mod that brings more convenience to RDA vaping. It has the same features as the usual vape mod but has an extra e-juice bottle. With it, RDA Atomizer will not need to add e-juice frequently. You can add e-juice directly by simply squeezing the Bottle.

Many brands have launched their own BF Mod. Vandy Vape is a well-known DIY Vape brand. To cater to the use of BF Mod, the new RDA will be equipped with a BF Pin. You don't need to worry about your device being unusable. If you are interested in BF Mod, which one is the best BF Mod for you?

1.Vandy Vape Pulse X BF 90W Mod
3.Hugo Vapor Squeezer BF Mod

For more offers, please visit


Is RDA Atomizer Suitable for Beginners? Vape Guide

7:31 PM Unknown 0 Comments

If you are trying out e-cigarettes for the first time, you will hear a lot of vapers recommend you to use the Pen Kit or Starter Kit. Both devices have a common feature and are easy to use. They all belong to the e-cigarette device out of the box, and we don't even need to install anything. So what is the experience of RDA Atomizer for beginners?

When the beginners touch the Starter Kit, it is effortless to get started. Some Pod Kits can be used directly without even a fire button. We are simply vaping, no need to think or do anything. The Starter Kit saves us a lot of time and the vaping experience is quite satisfactory. But, to be honest, RDA Atomizer will open a new world for you.

RDA allows users to build their coils. We are free to set the coil resistance we want, and the vaping experience brought by RDA will be even more impactful. For the beginners, RDA will make us feel a little trouble because we need to wrap the wire ourselves and need to install it ourselves. But the most important thing is that you will get a sense of accomplishment.

When you build a coil yourself, the vaping feeling it brings is beyond your imagination, and you will worship yourself. But for users who don't like to wrap their wires, Pre-Made Tank will be more suitable for you. It has not only excellent atomization but also is easy to replace. So what do you think? Which Atomizer do you prefer?


If Your Wismec DNA200 Has Encountered Some Problems

1:46 AM Admin 0 Comments

Q: What if the screen display "check battery"/ "weak battery"/ "battery low" after inserting fully-charged batteries? 

A: Firstly, please install other set of fully charged cells for a try.
Secondly, there is a small cotton like this in the device, please take out of it form the hole with tweezers. Then a screw will be shown, please tighten the screw.

Q: Why the file downloaded from your website can not be open?

A: You should download the Escribe software firstly and then related operation can be continued. And the link is


Vapefly Galaxies MTL Squonk RDTA Review

7:46 PM Unknown 0 Comments

All I shared today is an RDTA from Vapefly. As a young e-cigarette brand, what kind of experience does Vapefly bring? Let's take a look at its Galaxies MTL Squonk RDTA.

RDTA is a structure that combines the advantages of both ADMA and RTA Atomizers. It can support us to install the desired coil and provide us with a certain capacity of e-juice tank. But this structure, unlike the RTA and the common Sub-Ohm Tank, separates the coil from the e-juice tank for better air flow.

Let me show you more Vapefly Galaxies MTL Squonk RDTA details. On the Galaxies MTL Squonk, we get 2ml e-juice storage and can install a single coil. As an MTL device, it pays more attention to bringing our taste. A 360-degree air outlet is placed under the coil to provide a better air contact area for the coil.

Unlike many RDTAs, it uses a side airflow control system to give us a more precise intake air volume control. There will be airflow holes on both sides, we can open them at the same time, or you can choose to open them on one side.

The shrinking drip tip is an important reason for us to get a better taste. The narrow diameter drip tip allows the vapor to be better compressed, and finally, we get a more intense taste. In short, as an MTL device, Galaxies MTL Squonk has our effect. And in the vapor production and vapor temperature, we can more freely adjust to the effect we want. I think you should try it yourself.


2018 Best RDA Vape Mod | Eleaf Pico Squeeze 2

11:59 PM Unknown 0 Comments

Eleaf has always been an e-cigarette brand that adheres to a minimalist design style. Under such a brand without complicated design style, it still has many supporters. So Eleaf's success is due to its innovative vaping experience. Eleaf recently launched its new RDA Mod, Pico Squeeze 2. Let's take a look

2018 Best RDA Vape Mod  Eleaf Pico Squeeze 2

What is Pico Squeeze 2 ? This is a single battery powered RDA Mod. It can be powered by a single 21700 or a single 18650 battery and achieves a maximum output of 100W. In its mini size, it didn't lose any fun. We can set the output we want on this device, such as output mode, output power and so on. The Pico Squeeze 2 also comes with 7 color lights to make it even more attractive. Here is an 8ml e-juice bottle for better RDA Vaping. If you are looking for an ultra-portable RDA Mod, don't miss it.


Get 6 Things from Lost Vape Furyan Mech 21700 Squonker Mod

8:43 PM Admin 0 Comments

Lost Vape will be upgraded to a new level because of its first fully mechanical Vape Mod. Furyan mod is the latest Vape Mod from Lost Vape. This fully mechanical vape mod can support 21700/20700 batteries. There will be a battery adapter that allows us to use the 18650 battery. I just want to tell you that when I use the 18650 battery, I can't help but praise this product, so if I use the 21700/20700 battery, I can hardly imagine how amazing it is.

Get 6 Things from Lost Vape Furyan Mech 21700 Squonker Mod

This product has received a lot of attention once it is launched, not only the vapor chaser is concerned about its performance, of course, this mechanical aesthetic design! If you like this product too, let us know what’s in the Lost Vape Furyan Mech 21700 Squonker MOD package:

A Furyan Mod (this full-mechanical vape mod powered by a single battery. There is no display here without any adjustments)

A Furyan User Manual (please read it carefully before use. This is a mechanical vape mod, the control is easier, but there are some things that can't be done here, please follow the instructions)

Two 9ML Soft Silicone Squonk Bottles (we can get two e-juice bottles in the package. One is the pre-loaded bottle and the other is the spare bottle)

An 18650 Battery Adaptor (this is a 21700/20700 powered device. We can use the battery adapter so that we can use the 18650 battery)

A Brass Polishing Cloth (Furyan mod uses brass as a frame, and Polishing Cloth makes this device look brighter)

A warranty card (this is the only certificate for the Furyan mod warranty, please keep it)

If you are interested in this product, you can also go to Cloumix to buy. Now you can not only get a discounted price, but also enjoy free shipping. bring it on

Lost Vape Furyan Mech 21700 Squonker Mod package


Get 8 Things from Lost Vape Paranormal DNA250C Box Mod

11:31 PM Admin 0 Comments

Paranormal DNA250C is a 200W High Power Mod from Lost Vape. This is an upgrade based on Paranormal DNA250, which uses the latest Evolv DNA 250C Board to give us a better experience. This product not only allows for an innovative replay mode, but its boost function also gives us a better vapor experience.

Get 8 Things from Lost Vape Paranormal DNA250C Box Mod

So before you decide to buy, let's take a look at what’s in the Lost Vape Paranormal DNA250C Box Mod package:

A Lost Vape Paranormal DNA250C 200W TC Box Mod (this is a device powered by two 18650 batteries and achieves a maximum output of 200W. Under TC, we can use many wires of different materials, such as nickel 200, SS, Ti, etc. Wait)
A USB cable (this device supports charging via USB interface. For the best charging, please use this charging cable)
A reverse charging adapter (through this adapter, we can use this vape mod as a power bank to charge other devices)
Two spare magnetic panels (there are two spare magnetic panels for us to replace. Different color products will have different styles of panels. For more information, please visit
A Suction Cup (we can suck the panel more easily through the suction cup)
A quick guide (a quick guide will tell us what replay is, how to use the replay function. Of course, here will also tell us how to turn Paranormal DNA250C into a power bank)
A user manual (please read the user manual carefully before use. The user manual will tell us how to use Paranormal DNA250C correctly)
A warranty card (this is the only warranty certificate for this device, please keep it)

Lost Vape Paranormal DNA250C Box Mod package


2018 Best Flexible Vape Kit | IJOY Elite Mini Kit

8:04 PM Unknown 0 Comments

IJoy received a great deal of attention in the e-cigarette fair in Shenzhen in 2018 because it introduced the first AI Vape Kit for the electronic cigarette industry. This leading e-cigarette brand has always been a surprise to everyone. What we want to share with you today is its latest launch of a flexible Vape Kit, the IJOY Elite Mini Kit.

What is IJOY Elite Mini Kit? This is a 3-in-one Vape Kit. This product is an upgraded version of the IJOY RDTA Box mini. It has a 2200mAh battery and can reach a maximum output of 60W. Yes, as I said earlier, this is a 3-in-one Kit. It has three different vaping forms, allowing you to switch between Sub-ohm tank, RTA tank and pod tank. Yes, you will be pleasantly surprised to find in the packaging of this product, it has a separate pod tank, and this device can also be set in the pod tank output mode. If you want to switch to sub-ohm tank or RTA Vaping, just replace the other Atomizer. It is so flexible and high performance. If you are a vaping fan, don't miss it. Now you only need an Elite Mini and you get a full vaping experience. Who can cool better than you?


What Will You Get from Joyetech eVic Primo Fit Kit with Exceed Air Plus

2:06 AM Admin 0 Comments

Joyetech is my first brand of e-cigarettes. This is also the brand that e-cigarettes have emerged in the early days. So for Joyetech's products, it only looks cool, I will buy it, because I never worry about the taste it brings. Well, today's eVic Primo Fit is one of my choices. This is a simple but very mysterious vape kit, especially its glass tube.

Joyetech eVic Primo Fit Kit with Exceed Air Plus

What will you get from it?

The eVic Primo Fit Kit has a built-in 2800mAh battery and adjusts power to 1W-80W. It uses a flat glass tube, but it can have a capacity of 3ml. So apart from these, what does this product bring us? I think you need to know what’s in the Joyetech eVic Primo Fit Kit package:

1. Joyetech eVic Primo Fit 2800mAh 80W TC Box Mod (this is a 2800mAh powered device that can achieve a maximum output power of 80W)
2. Joyetech EXCEED Air Plus Atomizer with 3.0ml Capacity (This product has a 3ml capacity, with a cellular drip tip, making it look more wild)
3. EX 0.5ohm DL. Head (especially for coils like DL vaping friends, it has 0.5 ohm resistance. DL (direct lung))
4. EX 1.2ohm MTL. Head (this coil has a 1.2ohm resistance. If you prefer the use of cigarettes, you can use this coil)
5. Spare Glass Tube (this is a spare glass tube. If the pre-installed glass tube is accidentally damaged, we can replace it ourselves)
6. Two Manuals (Please read carefully before use. This includes the eVic Primo Fit user manual and the Exceed Air Plus user manual.)
7. Warranty Card (just the warranty certificate for this device, please keep it)
8. 2 Warning Cards (use correctly as instructed)
9. Spare parts (including atomizer seals, etc.)

Joyetech eVic Primo Fit Kit package


2018 Best Starter Kit | SMOK Mag Baby E-cigarette Kit

8:30 PM Admin 0 Comments

In 2018 SMOK introduced a lot of feature-rich e-cigarettes. For every vapor chaser, this brand is very familiar to everyone. So what I want to share with you today is a Starter Kit from SMOK, Mag Baby E-cigarette Kit. Will it bring any new surprises?

What is Mag Baby E-cigarette Kit? Mag Baby uses a 1600mAh internal battery for energy to bring an ultra-portable size. We can easily take it in our hands and take it wherever we want. It comes with two adjustment buttons that allow us to adjust our desired output power. Of course, it has a maximum output of 50W, it can well meet beginner's vaping requirements. The TFV12 Baby Prince tank is the best gift that SMOK can give to beginner. It not only has an extraordinary taste but also brings a tremendous vapor. If you are interested in vapor performances, this product can lead you into vapor world. Now that Cloumix is doing special promotions, I think this will be the best time to buy!

2018 Best Starter Kit SMOK Mag Baby E-cigarette Kit


Take A Minute to Understand What is Lexicon with ELLO Duro

12:54 AM Admin 0 Comments

Lexicon with ELLO Duro Kit is a new product launched by Eleaf. The biggest highlight of this product is the design of the product. There are different shapes of LED lights around the fuselage, even if the fire button is the same. Lexicon with ELLO Duro is not only very popular in appearance, it's the same experience that we can use. Before you buy, we need to know the Lexicon with ELLO Duro Details first. Lexicon with ELLO Duro has a maximum output of 235W and can accommodate two 18650 batteries. It comes with an ELLO Duro Atomizer with a simpler refill system that simply pushes on the top cup to see the fill port. This product contains a HW-N 0.2ohm Head, and HW-M 0.15ohm Head. We can freely control the output we want through two adjustment buttons. ELLO Duro has 6.5ml and 2ml capacity options. If you like RDA Vaping, Lexicon can also meet your needs. It can be used with 0.05Ω-3.0Ωcoil, so you have more fun. So this is Lexicon with ELLO Duro. What do you think?

Lexicon with ELLO Duro Details


LUXOTIC NC, you should understand?

3:29 AM Admin 0 Comments

What are you focusing on recently? Movies, music, or stars, of course, it's all about life. So if you're interested in knowing the latest vape kit, then start with the Wismec LUXOTIC NC with Guillotine V2 Kit.
Wismec LUXOTIC NC with Guillotine V2 Kit

Wismec LUXOTIC NC with Guillotine V2 Kit is a product that has recently been sold very well by a certain brand. Once it was put into the market, it was popular among the e-cigarette enthusiasts.

Below, I will do my best to describe what features of the WiSMec LUXOTIC NC with Guillotine V2 Kit for you to better understand the WiSMec LUXOTIC NC with Guillotine V2 Kit.

1. Brand: Wismec
2. Color: green resin and red resin
3. Battery: 18650 Type and 20700 Type
4. System: multiple (voltage, circuit, temperature, nebulizer)
5. Reliability: Security
6. Operation: Simple
7. Price: Affordable, less than $100

I believe that through the above introduction, you must have a clear understanding of the features of the WiSMec LUXOTIC NC with Guillotine V2 Kit. If you have any doubts or you are curious about this product, welcome to the details of the WiSMec LUXOTIC NC with Guillotine V2 Kit. Pages to view, while the home page also has a lot of popular text for you to read, if you are interested, you act quickly.


Are you interested in electronic cigarettes?

12:29 AM Admin 0 Comments

Q: Many people ask the effectiveness of e-cigarettes. The e-cigarette publicity ads that we usually see are also more publicized. They emphasize the e-cigarette smoking cessation effect. Then the question arises: Can e-cigarettes help smokers quit smoking?

Batpack with Joye ECO D16

Answer: I can clearly tell you that e-cigarettes can't help people quit smoking 100%, but it is undoubtedly very helpful to improve the health of smokers. Today's e-cigarette products are all developed to help smokers. The ultimate goal is to reduce people's dependence on traditional cigarettes through e-cigarettes. Since e-cigarettes have come from the world, it has been proved that e-cigarette smoking cessation rates are 30% ~40%, so from this result, smoking cessation effect is still considerable. So, if you want to quit smoking, I think e-cigarette is a very good choice. As for  selection, I recommend that you use the Batpack with Joye ECO D16 , because the product is very safe and reliable.


Chinese Valentine's Day Shopping at Vandy Vape Authorized Online Store

6:59 PM Admin 0 Comments

Good #news, huge #sales from for Chinese Valentine Day from 20th, May to 31st, May.

You Can Get:

1.$5 off over $30 with code: CM5LOVE

2. 20$ off over $100 with code: CM20LOVE

3.15% off on your first purchase for new members

4. Freeshipping for purchase over $52.

Click here and add your cart!!

Chinese Valentine's Day Shopping at Vandy Vape Authorized Online Store


SMOK Stick V8 Kit,A Pen Style Cloud Beast Starter Kit

2:09 AM Admin 0 Comments

The Stick V8 Kit is a Pen Style vape kit from SMOK. This is a product made up of Big Baby Beast. What kind of experience would it bring us?

The 24.5mm diameter gives us a 3000mAh built-in battery, which means the Stick V8 has a longer battery life. This is an Easy-To-Use Kit, you can do all the operations through a Fire button.

You don't need to worry about the output problem, SMOK is ready for you all, you just press the fire button to vaping. The Big Baby Beast can store 5ML e-liquid. If the Glass tube is accidentally damaged, you can also use a replacement glass tube for replacement.

 The V8-Baby Q2 (0.4 ohm) dual coil will overturn your understanding of the Cloud Beast. Hey, what are you hesitating?  Let's start a vaping trip with Cloumix Vape Online Store, one of China's three largest electronic cigarette sellers.


AUGVAPE New Partner In China - Cloumix Technology Co., Ltd

8:29 PM Admin 0 Comments

AUGVAPE is an electronic cigarette brand. AUGVAPE is committed to bring you healthier products that replace tobacco. AUGVAPE has now launched its own products, including vape kits, vape mods, vape tanks and more.

Now, Cloumix has been officially authorized by AUGVAPE, so you can buy genuine products from AUGVAPE on Cloumix Vape Online Store. You can also verify the authorization information through the link below the article.

Cloumix vape online store:

Check the authenticity of the Cloumix here:


Cloumix Vape Online Store Has Been Officially Authorized By Pioneer4you

3:26 AM Admin 0 Comments

Pioneer4you is an e-cigarette brand. Its products include vape kits, vape mod, vapetank. Pioneer4you and its features are good quality and reasonable price, timely supply, excellent quality. The Pioneer4you brand has expanded to United States, Canada, Mexico, France, Germany, England, Spain, Poland and other international markets.

Now that Cloumix has been officially authorized by Pioneer4you, you can purchase authentic electronic cigarettes from Pioneer4you on Cloumix Vape Online Store. We guarantee that the products we sell are all from Pioneer4you products, and there is no falsehood. You can also verify the authorization information through the link below the article. Thank you

Cloumix vape online store:

Check the authenticity of the Cloumix here:


Is ProColor Kit Better Than The Alien?

1:41 AM Admin 0 Comments

SMOK ProColor and Alien have similar size and shaped. However, you won't find a 1.3 inch colorful TFT screen and RBG backlights on the Alien. To tell the truth, SMOK gave the Alien a facelift, simple slapped some RGB backlights on it.

SMOK ProColor has a brand new UI and a color LED shield around the screen, which is more convenient to use. It supports 225W maximum output and comes with a totally new designed software interface and a fire bar of ergonomic hand feeling design. Combined with the world famous and beloved TFV8 Big Baby tank, the SMOK ProColor Kit can provide flavorful vaping.

However, the SMOK Alien adopts a bright OLED screen and nice click buttons. Its maximum power is only 220W. It is combined with TFV8 Baby Tank which has 3ml capacity.


Eleaf ELLO Atomizer

2:55 AM Admin 0 Comments

 The ELLO atomizer, a new vape tank released by Eleaf recently, comes with an ELLO Atomizer, a HW1 single-cylinder 0.2ohm head, a HW2 dual-cylinder 0.3ohm head, and a HW3 triple-cylinder 0.2ohm head. The diameter and height of the atomizer is 25mm and 46mm, the weight is only 45.6g. There are six colors available: silver, black, greenery, blue, gold, red.
 The ELLO vape tank features 2ml e-liquid capacity which can be extended to 4ml by replacing a taller glass tube. With a retractable top filling system, you can refill the e-liquid more convenient. All the parts of the ELLO can be detached, you can wash it much more easily. With the HW coils: HW1 single-cylinder 0.2ohm head, HW2 dual-cylinder 0.3ohm head, and HW3 triple-cylinder 0.2ohm head, the ELLO will provide you with more different vaping experience. The dual air inlets with optional airflow, will provide you with great vapor production. With the adjustable airflow, you can operate it more easily. In conclusion, the ELLO atomizer will be a good choice for you.